| Tensile, flexural, impact and hardness properties of plastics |
| Tensile Test for yield stress + yield strain, on injection moulded specimens |
A |
ISO 527-2 |
€ 420 |
| Charpy Notched Impact Strength testing at +23 °C incl. specimen notching |
A |
ISO 179-1 |
€ 390 |
| Thermal analysis |
| Thermogravimetry (TG) - Content of carbon black |
A |
ISO 11358-1 |
€ 390 |
| Differential scanning calorimetry (DSC) - Oxidation induction time (isothermal OIT) |
A |
EN ISO 11357-6 |
€ 390 |
| Differential scanning calorimetry (DSC) - Glass Transition Temperature (Tg) |
A |
ISO 11357-2 |
€ 420 |
| Differential scanning calorimetry (DSC) - Temperature and enthalpy of melting |
A |
ISO 11357-3 |
€ 440 |
| Properties of the plastic melt |
| Melt mass-flow rate (MFR) |
A |
ISO 1133-1 |
€ 390 |
| Chemical and physic-chemical testing of plastics |
| Density of plastics |
A |
ISO 1183-1 |
€ 390 |
| Rubber |
| Hardness - Shore A |
A |
ISO 48-4 |
€ 390 |
| Tensile stress-strain properties |
A |
ISO 37 |
€ 440 |
| Density of rubber |
A |
ISO 2781 |
€ 390 |
| Geotextiles and geosynthetics |
| Thickness at specified pressure |
A |
ISO 9863-1 |
€ 390 |
| Wide-width tensile test |
A |
ISO 10319 |
€ 420 |
| Static puncture test (CBR test) |
A |
ISO 12236 |
€ 420 |
| Water permeation characteristics normal to the plane, without load |
A |
ISO 11058 |
€ 460 |
| Mass per unit area |
A |
ISO 9864 |
€ 390 |
| Plastic pipes |
| Tensile Properties of polyolefin pipes |
A |
ISO 6259-3 |
€ 420 |
| Ring stiffness |
A |
ISO 9969 |
€ 420 |
| Longitudinal reversion of thermoplastics |
A |
ISO 2505 |
€ 420 |
| Creep ratio of thermoplastic pipes |
A |
ISO 9967 |
€ 470 |
| Determination of dimensions of fittings |
A |
EN ISO 3126 |
€ 440 |
| Resistance to external blows -staircase method |
A |
EN ISO 11173 |
€ 600 |
| Resistance to external blows - round-the-clock method |
A |
EN ISO 3127 |
€ 600 |
| Resistance to internal pressure at 20°C |
A |
ISO 1167-1 und 1167-2 |
€ 520 |
| Resistance to internal pressure at 80°C |
A |
ISO 1167-1 und 1167-2 |
€ 520 |
| Degree of pigment or carbon black dispersion |
|
ISO 18553 |
€ 420 |
| Sports surfaces |
| Vertical ball behaviour |
A |
EN 12235 |
€ 440 |
| Vertical deformation |
A |
EN 14809 |
€ 420 |
| Shock absorption |
A |
EN 14808 |
€ 420 |
| Slip resistance |
A |
EN 13036-4 |
€ 440 |
| Tensile properties of synthetic sports surfaces |
A |
EN 12230 |
€ 440 |
| Thickness |
A |
EN 1969 |
€ 420 |
| Determination of critical fall height |
|
EN 1177 |
€ 440 |
| Abrasion resistance |
|
EN ISO 5470-1 |
€ 440 |
| AAA Method |
|
CEN/TS 16717 |
€ 470 |
| Rotational resistance |
A |
EN 15301-1 |
€ 440 |
| Particle size distribution – sieving method |
|
EN 933-1 |
€ 440 |
| Methods for determination of mass |
|
ISO 8543 |
€ 420 |
| Thermal insulating products |
| Compression behaviour of rigid cellular plastics |
|
ISO 527-2 |
€ 420 |
| Dynamic stiffness |
|
ISO 9052-1 |
€ 470 |
| Dimensional stability under specified temp. and humidity conditions |
|
EN 1604 |
€ 420 |
| Tensile strength perpendicular to faces |
|
EN 1607 |
€ 440 |
| Short term water absorption by partial immersion |
|
EN ISO 29767 |
€ 420 |
| Apparent density |
|
EN 1602 |
€ 420 |
| Compressive creep |
|
EN 1606 |
€ 520 |
| Water vapour transmission properties |
|
EN 12086 |
€ 480 |
| Paints and varnishes |
| Measurement of coating thickness -- Amplitude-sensitive eddy-current method |
A |
ISO 2360 |
€ 420 |
| Measurement of coating thickness - Magnetic method |
|
ISO 2178 |
€ 420 |
| Pull-off test for adhesion |
|
ISO 4624 |
€ 480 |
| Cross-cut test |
|
ISO 2409 |
€ 420 |
| Assessment of degree of blistering |
|
ISO 4628-2 |
€ 420 |
| Flexible sheets for waterproofing |
| Tensile properties |
|
EN 12311-2 |
€ 420 |
| Resistance to tearing (nail shank) |
|
EN 12310-1 |
€ 420 |
| Resistance to impact |
|
EN 12691 |
€ 420 |
| Thickness and mass per unit area |
|
EN 1849-2 |
€ 420 |
| Environmental exposure tests |
| Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps |
|
EN ISO 4892-2 Method A |
€ 600 |
| Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps |
|
ISO 4892-3 Cycle 1 |
€ 600 |
| Chemical resistance |
|
DIN 68861-1 / ÖNORM A 1605-12 |
€ 460 |